Err

Pipe Boxing

Installing fire sprinkler pipework? We’ve got it covered

Installing fire sprinkler pipework? We’ve got it covered If you're installing or retro-fitting fire sprinkler systems in tower blocks and flats, Encasement’s ‘Versa’ pipe boxing range provides the perfect cost effective solution for concealing sprinkler pipework.

Manufactured from pre-formed FSC® certified plywood and pre-finished in a durable white melamine, our Versa ‘L’ shaped boxing is available in either 5mm or 8mm thicknesses for use inside flats or in public areas, such as stairs and lift lobbies where sprinklers are required.

Versa sprinkler pipe boxing is available in a wide range of sizes and helps save time, as there’s no fabrication or painting required on site. Just cut to the required length, drill holes for the sprinkler heads and secure to the wall or ceiling. 

Our durable Versa boxing can be used with standard sprinkler heads or concealed ‘pop-out’ units with cover caps.

Encasement is the UK’s leading manufacturer of pre-formed plywood boxing and decorative casings. Whatever your requirement – we’ve got it covered.

Created On  19 Apr 2018 10:28 in Pipe Boxing  -  Permalink
0 Comments Read more... 

Fire sprinkler systems – going undercover

Fire sprinkler systems – going undercover As residential fire safety, particularly in multi-storey buildings and tower blocks has been at the centre of attention since last June, the groundswell of opinion is clearly behind the installation of fire sprinkler systems as part of a multi-million pound programme of fire protection upgrades.

While discussions continue regarding how the work is being funded, it appears that local authorities and housing associations are likely to make a significant contribution to the cost, so it’s inevitable that ‘value’ and ‘cost effectiveness’ will form part of the tendering procedures that are already taking place. 

No compromises

However, due to the intense public focus and scrutiny directed towards public sector housing, the safety of tenants and residents will not be compromised for reasons of economy, as ‘cost cutting’ was one of the areas of concern raised by Dame Judith Hackitt’s interim report last December.

Nevertheless, it’s clear that fire sprinkler systems are becoming an integral part of the high-rise residential environment, which should increase further as part of the proposed review of building regulations. While fire sprinklers are comparatively simple to incorporate in new builds, as they can be integrated right from the outset at the planning and design stage, for retro-installed solutions inside individual flats and for communal areas, sprinkler system pipework will need be surface mounted in most cases.

Clearly, the pipework and sprinkler heads need to be concealed to not only give a more aesthetic finish to each project and avoid complaints from tenants, but to also provide a practical purpose of containing the system components and acting as a visible barrier to potential tampering.

The cover up

When concealing the sprinkler system pipework, consideration also needs to be given to the amount of time required to install the pipe boxing, which is why pre-formed and pre-finished solutions, such as Encasement’s Versa sprinkler system pipe boxing, are increasingly specified by sprinkler system contractors.

Versa ‘L’ shaped pipe boxing is manufactured from 5mm or 8mm thick, FSC® certified and compliant timber in a range of sizes and the system also includes accessories, such as internal and external corners to help create an integrated finish to the sprinkler installation. All that’s needed to install the sprinkler pipe boxing on site is to drill the holes for sprinkler heads, cut to length and secure to the wall or ceiling with wood battens, screws and white caps.

From our experience of working with contractors on countless social housing projects where pipework needs to be concealed, Versa boxing solutions can be fitted in less than half the time of site made alternatives. Also, as they’re pre-finished with durable white melamine, there’s no painting required on site, which also saves time and cost.

Saving time and cost

This time saving provides a number of benefits. For contractors, local authorities and housing associations, the fire safety upgrades can be completed within a shorter timescale, while simultaneously minimising the disruption period for tenants while the work is being carried out.

Potentially the most important advantage is that costs can be reduced, not by ‘cutting corners’, but by cutting the time spent during the installation without compromising the quality or integrity of the installation.

When considering the scale of the sprinkler installation programmes being planned during the next 5 years, which is conservatively estimated at around 50,000 individual flats, then just a 10 minute time saving by using Versa sprinkler boxing will cumulatively save more than 2.5 years, if working an 8 hour day.

These figures are persuasive in their own right, but the important focus is rightfully on improving fire safety in high-rise residential buildings, and Versa can make a contribution to that process in terms of effectiveness, ease of installation and economics.

Created On  19 Apr 2018 10:24 in Pipe Boxing  -  Permalink
0 Comments Read more... 

Pipe boxing – Undercover work

Pipe boxing – Undercover work

With the potential for local authorities and housing associations to save tens of thousands of pounds, just by changing the way heating system and boiler pipework are concealed on site, Encasement’s Managing Director Martin Taylor provides a detailed insight on where and how the cost can be removed from the process.

In any property, whether it’s a new build or a refurbishment project, there will inevitably be some exposed pipework that will need covering for reasons of safety, in the case of hot pipes, or purely aesthetics.

However, for local authorities (LA) and housing associations (HA), where they primarily deal with older housing stock, which requires upgrading and annual maintenance, the high volumes of exposed pipework for heating systems, boilers, gas, mains water and waste can present a number of challenges.

Usually, due to the age of the properties and the nature of their construction, which predominantly uses concrete and brick, mechanical and electrical services need to be surface mounted, as they can’t easily be concealed during installation.

Given that upgrading heating systems with more energy efficient solutions in older social housing stock is important to reduce emissions and energy consumption, while improving comfort for occupants, there is also a need to ensure that the updated system is safe and looks good too.

And it’s at this point where LAs and HAs have the opportunity of either saving or wasting thousands of pounds on their...

Click to read more >>
...

Created On  9 Aug 2016 10:05 in Boiler CasingPipe Boxing  -  Permalink
0 Comments Read more... 

The easy answer for FSC® compliant pipe boxing and boiler casing

The easy answer for FSC® compliant pipe boxing and boiler casing

With sustainable sourcing and procurement policies now a vital part of the building products supply chain for both social housing and private residential developments, it’s good to know that Encasement is the UK’s only FSC® certified manufacturer of pre-formed plywood pipe boxing and boiler casings.

When you need to box in pipe work quickly and easily while ensuring that you’re caring for the environment and complying with your company’s sustainable procurement policy, Encasement is the clear choice.

All our FSC® boxing products carry a full ‘Chain of Custody’ certification from the Forest Stewardship Council to verify that the timber used is from sustainable and managed sources, so you don’t have to worry about compliance.

It’s quick and easy to fit on-site too. As our pipe boxing an boiler casings are pre-formed and pre-finished in durable melamine, they can be fitted in less than half the time of site made alternatives and there’s no need for painting, which saves time and money.

For FSC® compliant pipe boxing or boiler casing – Encasement has it covered.

For more information on our boiler pipe casings, please visit

http://www.encasement.co.uk/boiler-pipe-work-casing.html

http://www.encasement.co.uk/gallery_boiler-pipe-casing.aspx

View our FSC® certificate here

Learn more about our sustainable products

Created On  12 Apr 2016 9:12 in Boiler CasingPipe Boxing  -  Permalink
0 Comments Read more... 

Sustainable procurement – Are you compliant?

Sustainable procurement – Are you compliant?

For local authorities, housing associations and contractors, balancing obligations under Government guidelines on the use of sustainably sourced products with the need to control costs can be a challenge, but Encasement can help.

As we are UK’s only manufacturer of pre-formed plywood pipe boxing and casings products that holds an FSC® ‘Chain of Custody Certification’ from the Forest Stewardship Council, you can be compliant with your sustainable procurement policy without compromising cost or quality.

You can now specify fully compliant FSC® Chain of Custody Certified pipe boxing and boiler pipework casings from our extensive, market leading range, at the same price as non-certified pre-formed plywood products.

To learn more about our FSC® certified products or explore the UK compliance information, just click one of the links below.

Alternatively, give us a call on 01733 266889

Pipe boxing

Boiler pipework casing

UK Government procurement guidance

Sustainability and compliance

Download our FSC® certificate

Created On  1 Feb 2016 12:18 in Boiler CasingPipe Boxing  -  Permalink
0 Comments Read more...